Blessed and supported by the team of adroit professionals, our company is considered as one of the eminent manufacturers, suppliers & exporters of Pipe Flocculator. Manufactured using quality tested raw materials, these flocculators are primarily used during waste water and chemical treatment. Known for its high strength, impeccable performance and corrosion resistant surface, the Pipe Flocculator is high in demand. Moreover, our company is committed to provide these flocculators to clients without any delay.
Coagulation And Flocculation by controlled Turbulence
The pipe flocculator is a plugflow reactor in which processes such as coagulation, flocculator, demulsification, precipitation and pH control can take place under hightly controlled and well defined conditions.
The above mentioned processes take place under turbulent flow conditions. At the chemical injection points the pipe diameter is adapted to ensure instantaneous mixing of chemicals and wastewater. Through the cross-section of a pipe the mixing intensity is virtually homogeneous. Reaction time is determined by the pipe length and flowrate and based on the exact requirements, no excess is required. In the plug flow reactor the process can be influenced at any time as opposed to tank reactors, where only one conditions per tank can be maintained.
Generally speaking a pipe flocculator is used where a coagulant, a flocculant and optionally a chemical for pH correction are dosed in sequence for the removal of turbidity and/or COD or precipitants.
The use of a pipe flocculator in combination with a flotation system can give COD removals to upto 95%.
K-Pack Systems has a wide experience in chemical treatment, particularly in the use and selection of coagulants and flocculants in combination with a PFR pipe flocculator. The PFR pipe flocculator is exceptionally suitable for our latest developments in the non-toxic bio-degradable coagulants and flocculants range.
Specific Details and characteristics
High quality and durable materials like HDPE. PVC, MS pipes
No Short-circuiting and hardly and back-mixining
No retention time distribution.
Homogeneous mixing throughout the cross section
Completely predictable and controlled mixing environment
No moving Parts
No additional energy source
All required process conditions and chemical additions in a single unit.
Uniform floc growth
Small space requirements
Exchange mixing pieces.
Standards units are available upto a flow of 400 m3/hr.
Customized units for special applications.